Lamptron 16mm and 25mm Vandal Resistant Switches

Graeme*Kustom* · 01-07-2010, 18:12

Alongside the range of 22mm diameter switches, we have latched and momentary switches in 16mm and 25mm sizes.

These are ideal for, well, smaller and bigger applications, but a good example is that the 16mm switch is a good fit for the reset switch on Lian Li PC-60 and PC-7 cases, and the 25mm switch drops in nicely to Lian Li full tower models with top mounted power buttons (eg B-71B).

These are available in silver / black housings and with blue ring illumination.

Momentary Switches (for use as power / reset buttons) : http://www.kustompcs.co.uk/acatalog/..._Switches.html
Latched Switches (for powering devices such as fans or lights) :
http://www.kustompcs.co.uk/acatalog/..._Switches.html

foz34 · 22-07-2010, 19:24

Hi,

I'm new to the forum and was hoping somebody can help me wire one of these
to a Mountain Mod Case. There is a note on the Lamptron 22mm switch that it requires a further 12v power supply to illuminate fully. I'm assuming this can be
powered via the power supply directly. Can somebody please elaborate on how this would best be achieved.

Graeme*Kustom* · 22-07-2010, 19:41

If you could email the store I'll drop you back some more info on this. It will remind me that I was going to write a guide hooking these up

01-07-2010, 18:12	#1
GraemeKustom Administrator Join Date: Apr 2001 Location: Ayr, Sunny Scotland. Yes, that same Scotland. Posts: 13,604	Lamptron 16mm and 25mm Vandal Resistant Switches Alongside the range of 22mm diameter switches, we have latched and momentary switches in 16mm and 25mm sizes. These are ideal for, well, smaller and bigger applications, but a good example is that the 16mm switch is a good fit for the reset switch on Lian Li PC-60 and PC-7 cases, and the 25mm switch drops in nicely to Lian Li full tower models with top mounted power buttons (eg B-71B). These are available in silver / black housings and with blue ring illumination. Momentary Switches (for use as power / reset buttons) : http://www.kustompcs.co.uk/acatalog/..._Switches.html Latched Switches (for powering devices such as fans or lights) : http://www.kustompcs.co.uk/acatalog/..._Switches.html __________________ Graeme Clark, http://www.kustompcs.co.uk Want to link to Kustom? Banners are here. Follow our tweets ... Like our facebook page... Check out our vids Why 'prosg' is the new 'ready'

22-07-2010, 19:24	#2
foz34 Foz34B-Kalel Join Date: Jul 2010 Location: London Posts: 3	Power The Lamptron Switch Hi, I'm new to the forum and was hoping somebody can help me wire one of these to a Mountain Mod Case. There is a note on the Lamptron 22mm switch that it requires a further 12v power supply to illuminate fully. I'm assuming this can be powered via the power supply directly. Can somebody please elaborate on how this would best be achieved.

22-07-2010, 19:41	#3
GraemeKustom Administrator Join Date: Apr 2001 Location: Ayr, Sunny Scotland. Yes, that same Scotland. Posts: 13,604	If you could email the store I'll drop you back some more info on this. It will remind me that I was going to write a guide hooking these up __________________ Graeme Clark, http://www.kustompcs.co.uk Want to link to Kustom? Banners are here. Follow our tweets ... Like our facebook page... Check out our vids Why 'prosg' is the new 'ready'

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: