PDA

View Full Version : 92mm fans and grilles

strax
13-05-2001, 12:26
how about selling some 92mm fans and grilles.

Do you also offer a service to cut blowholes for other peoples cases?

I have a Supermicro 760 and would like some blowholes on the side panels.

If I brought the sedepanels in, could you cut the blowholes & supply the fans for it?

If so how much including the fans & grilles?

I would really like 92mm ones, but at a push , 2x80 or 1 x 120.
Maxi
13-05-2001, 12:57
Im not sure about 92mm, if not slap a 120mm in there, and Yes they do cut blowholes/cases, not sure of the price ...
Craig
13-05-2001, 13:13
yeah, they cut blowholes, very well too :)
i've got one in this case :)and if you do take in the case side, just take a note of where you want it, bearing mind it's 20mm deep and take it away from any case struts etc, then it's easy for them :)

[ 13 May 2001: Message edited by: Craig ]
Graeme*Kustom*
13-05-2001, 15:21
we charge £14 for 80mm blowhole with grill, £22 for 120mm .

We can do other styles too - eg with biozhazard grill or we can use fan ductings and aluminum mesh filters... we`re going to set prices on these next week.
strax
13-05-2001, 15:39
Do these prices include the fans?

If so, sounds a good price (saves me buying a holesaw!)

The only thing stopping me get 120mm's is the noise, I would have to hear them going first or maybe run them at 7v I spose.
Graeme*Kustom*
13-05-2001, 15:44
yep thats the cost of cutting the hole, the grill and the fan. done ! :)

Well feel free to stop by, we`ve got some different 120mm fans that you can hear...
strax
13-05-2001, 15:47
Is it a while you wait service (leave it for an hour with you) kind of thing or a bit longer than that?
Graeme*Kustom*
14-05-2001, 00:58
It`s an overnight service - the mods are not done in the shop...
strax
14-05-2001, 10:57
OK, I'll try and get my sidepanels down tomorrow morning.


probably just go for a 120 for the side and see if that improves the temps.