KyeC
07-05-2005, 20:54
Although i already posted this, there are a few more Qs as well.
I did buy a freezer 64 but theres a scary little chip on the middle. Its really small but really noticable. Im sure it would be ok. It can only face upward, so the air will be going on the plate of the PSU, since it has push-pull fans like the tagan.
Thirdly, i cant really install it without major hassle. the 4pin is near the bottom of the CPU, the ATX connector is slightly above, with memory to its side.
I really dont want to remove the motherboard from the case. Im in a very small work area, so its a pain in the ****. I was hoping to live with that i have, and depending if the next gen cards are AGP, i would buy the sus A8V Deluxe Motherboard, and install a XP-120 or 90 easily enough before i put it in the case.
the chip off the heatsink is right in the middle. Would it still preform better then stock cooling though?
Kye
I did buy a freezer 64 but theres a scary little chip on the middle. Its really small but really noticable. Im sure it would be ok. It can only face upward, so the air will be going on the plate of the PSU, since it has push-pull fans like the tagan.
Thirdly, i cant really install it without major hassle. the 4pin is near the bottom of the CPU, the ATX connector is slightly above, with memory to its side.
I really dont want to remove the motherboard from the case. Im in a very small work area, so its a pain in the ****. I was hoping to live with that i have, and depending if the next gen cards are AGP, i would buy the sus A8V Deluxe Motherboard, and install a XP-120 or 90 easily enough before i put it in the case.
the chip off the heatsink is right in the middle. Would it still preform better then stock cooling though?
Kye